『DE』DM556S CNC Digital Nema23 Schrittmotor Treiber 20-50V DC 1A-6A 200-51200 Sub

EUR 95,20 Sofort-Kaufen, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: powace08 ✉️ (4.091) 99.3%, Artikelstandort: Frankfurt, DE, Versand nach: EUROPEAN_UNION, GB, Artikelnummer: 276030015355 『DE』DM556S CNC Digital Nema23 Schrittmotor Treiber 20-50V DC 1A-6A 200-51200 Sub. 『DE』DM556S CNC Digital Nema23 Schrittmotor Treiber 20-50V DC 1A-6A 200-51200 Sub for CNC Router Engraving Milling Machine  

We will Ship from Germany warehouse to Below Europe Countries

Austria Belgium Bulgaria

Czech Republic

Croatia

Denmark Estonia
Finland France Germany Greece Hungary Ireland Italy
Latvia Lithuania Luxembourg Netherlands Poland Portugal Romania
Slovakia Slovenia Spain Sweden UK Malta  

Package include:
  • 3pcs DM556S Stepper motor driver

    • or

    • 4pcs DM556S Stepper motor driver



    • User manual will be send by email.


Descriptions:

  • ♞【DSP Digital Technology】It adopts the latest 32-bit DSP digital processing technology.The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology.The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors.
  • ♞【256 Subdivision】Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications. Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
  • ♞【Applicable motors】Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.
  • ♞【Input Voltage】Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz)
  • ♞【 Application Scenarios 】Suitable for various small and medium-sized automated equipment and instruments, e.g: Engraving Machines, Marking Machines, Cutting Machines, Carving Machines, CNC Router Machines , Automatic Assembly Equipment, etc. The best application effect in users expects small noise, high -speed device.It is especially effective in applications where users expect small noise and high speed.

Features

  1. It adopts the latest 32-bit DSP digital processing technology.
  2. The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology.
  3. The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors.
  4. Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications.
  5. Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
  6. Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.
  7. Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz)
  8. Photoelectric isolation, alarm output
  9. Photoelectric isolated differential signal input
  10. It has rising/falling edge, IO control spontaneous pulse, single/double pulse, high response/high speed and low vibration, self-measuring function.
  11. It has the protection functions of overvoltage, undervoltage and overcurrent.
  12. Variable current control greatly reduces the heat generation of the motor
  13. Ultra-low vibration noise


Dial Switches

  • SW1-SW3: Set The Operating Current (1.0A-6.0A)
  • SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis
  • SW5-SW8: Set the speed of subdivision and spontaneous pulses

Function Setting:

  • SW9:Edge sel,off=fall,on=rise
  • SW10:S-Filter,off=4ms,on=10ms
  • SW11-SW12:Mode Sel

A control signal timing in FIG.

  • t1: ENA (enable signal) DIR should advance at least 5μs, determined to be high. In general recommendations can be suspended;
  • t2: DIR PUL falling 1μs determined in advance of at least a high or low state;
  • t3: at least a pulse width of not less than 1.5 us;
  • t4: low level width not less than 1.5μs.

Common anode connection method

Common cathode connection method

Differential control signal interface wiring diagram

Wide applications

Suitable for various small and medium-sized automated equipment and instruments,such as Engraving Machines, Marking Machines, Cutting Machines, Carving Machines, CNC Router Machines , Automatic Assembly Equipment, etc. The best application effect in users expects small noise, high -speed device.It is especially effective in applications where users expect small noise and high speed.


Problem&Feedback     Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.     We are a new member in ebay now, and need understand both of sides     Pls email us before you want to leave any negative feedback Refund     When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos     Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost Contact us     Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again     Customer’s satisfaction is very important to us.
  • Condition: Neu
  • Package include: 3pcs / lot
  • Marke: RATTM MOTOR
  • Input: 20-50VDC
  • Model: DM556S
  • stepping motor: Can drive 4,6,8-wire two-phase stepping motor
  • sub-set range: 200-51200
  • Impulse response frequency up to: 500KHz
  • Current: Between1.0-6.0 A

PicClick Insights - 『DE』DM556S CNC Digital Nema23 Schrittmotor Treiber 20-50V DC 1A-6A 200-51200 Sub PicClick Exklusiv

  •  Popularität - 2 Beobachter, 0.0 neue Beobachter pro Tag, 208 days for sale on eBay. Gute beobachtend. 0 verkauft, 6 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 4.091+ artikel verkauft. 0.7% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv