『DE』2.2KW ER20 80MM CNC Frässpindel Motor Wassergekühlte VFD Clamp Pumpe Collets

EUR 481,36 Sofort-Kaufen, EUR 36,30 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: kuku218 ✉️ (1.731) 100%, Artikelstandort: Frankfurt, DE, Versand nach: EUROPE, Artikelnummer: 194863354762 『DE』2.2KW ER20 80MM CNC Frässpindel Motor Wassergekühlte VFD Clamp Pumpe Collets. 『DE』2.2KW ER20 80MM CNC Frässpindel Motor Wassergekühlte VFD Clamp Pumpe Collets for CNC Router Milling Engraving Machine 【Ship from Germany Warehouse】

We will ship this product from Germany to you. ship by Germany DHL to EU Customers

Welcome to choose our products

 fast shipping time to the following EU Countries

A ustria

B elgium

B ulgaria

C zech Republic

D enmark

E stonia

F inland

F rance

G ermany

G reece

H ungary

I reland

I taly

L atvia

L ithuania

L uxembourg

N etherlands

P oland

P ortugal

R omania

S lovakia

S lovenia

S pain

S weden

U nited Kingdom

Parcel include:

  • 1 x High quality 2.2KW ER20  Waterproof Water-cooled spindle motor 80x246mm 4 bearings 400Hz 24000rpm
  • 1 x 2.2 KW VFD  Inverter (220V input and 220V output)
  • 1 x 80mm spindle bracket clamp
  • 1 x 75W Water pump
  • 1 x 6M water pipes
  • 1Set of ER20 collet ( 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm each 1pcs)
  • English user manual of inverter

                                    100% Brand New and High Quality!!!

2.2kw ER20 Waterproof spindle motor 220V Water-cooled Carved metal  ENGRAVING MILLING GRIND

Specification:

 

Material:  Stainless Steel

 

Size:  Φ 80x246mm    (long length and high torque)

 

Power:  2.2Kw

 

Voltage:  220VAC

 

Current:  8A

 

Frequency:  0-400Hz

 

Speed:  10-24000rpm

 

Cooling:  Water-cooled

 

Precision tapered bore :  0.01mm

 

Runout off:  Less than 0.01mm

 

Bearing Lubrication:  Grease

 

Collet :   ER20  Collet

 

Bearings:  4 bearings(C7005x2 + C7003x2),P4 class

 

Net Weight:  6.1kg

 

Power supply interface:  Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 is blank.

 

Main application:   Wood, Aluminum, Stone, Metal, glass, PVC industry etc.

 

1. Instructions for use

1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.

2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.

3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.

 

2. Maintenance and Service

1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.

2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.

3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.

2.  2.2KW Inverter VFD 

 

1. Product   Feature:

    1. The inverter uses a simplified vector control technology, with extensive application of functional blocks.

    2. Can be the whole frequency band of torque automatic compensation, to compensate for the output torque to meet the user requirements for high torque; to improve the dynamic response and motor control features.

    3. Have a proportional, integral and differential (PID) control function of the closed-loop control, can be used for process control ,such as constant pressure water supply.

    4. Built-in the function of the textile-specific swing band.

    5. Fast current limit (FCL) function, to avoid undue running trip.

    6. Built-in DC injection braking.

    7. Acceleration / deceleration ramp features have a programmable smoothing function.

    8. Prevent the speed lose during over-voltage, in running the inverter automatically limit the increase of DC bus voltage.

    9. Fault and fault query monitoring features.

   10. Built-in serial communication interface, using standard modbus communication protocol.

 

2. Installation Environment

    1. There are vents or ventilation devices in indoor places.

    2. Ambient temperature -10 C ~ 40 C. If the ambient temperature is bigger than 40 C, but lower than 50 C, may take off the cover board of inverter or open the front door cabinet, in order to reduce temperature.

    3. Try to avoid high temperature and wet places, humidity less than 90%, and without dewfall.

    4. Avoid direct sunlight.

    5. Away from air pollution such as flammable and corrosive gases, liquids.

    6. No dust, floating particles of fiber and metal.

    7. It is not allowed that the inverter falls down or suffers from fierce impact or the inverter installed at the place that vibration frequently.

   8. Keep away from the electromagnetic radiation source.

3. 80mm cast aluminium bracket

 

 

 

 

4. 75W CNC spindle motor water pump 3.2m 220VAC

Specification:

Pump length:3.2m

Voltage:220-240VAC

Power:75W

Flow:3000L/H

Size:150x80x140mm

Water nozzle  diameter:6mm

Application:  fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too

5. 14Pcs ER20 Collet set

(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm each for one piece)

Description:

Out dia (D1):11.5mm

Height (H):18mm

Hole dia (D2):1-13mm

Run-out tolerance 0.1mm (0.006") First class 1065 carbon steel Hardened & precision groun

 

Shipping Service     Please open the package and check when you receive the parcels,if there are some damages before sign,if there are some damages , please do not sign and contact us immediately.     We will ship your order within 1-2 working days after payment. Problems&Feedback     Please contact us first when you encounter problems,and we will try our best to help you to solve it.     Pls contact us before you want to leave any negative feedback,we will provide solutions,negative feedback can not solve any problems. Refund&Replace    If you are not satisfied the product or it is other problem like as broken,pls tell us the detail reason and provide the photos.     Any reason required for all refund.Item must be in it's original condition and no physical damage.

Contact us     Welcome worldwide customer inquire and questions, we will feedback customer’s message within 1-2 days.     Customer’s satisfaction is very important to us.Thanks!

  • Condition: Neu
  • Pipes: 6M Pipes
  • Phase: 3
  • Current: 8A
  • Runout off: Less than 0.01mm
  • Application: Wood, Aluminum, Stone, Metal, Glass, PVC industry
  • Material: Stainless Steel
  • Location: Ship from Germany
  • Spindle advantage: long length and high torque,waterproof
  • Marke: RATTMMOTOR
  • Lubrication: Grease
  • VFD: 2.2KW VFD Inverter 3HP (220V input and 220V output
  • clamp: 80mm diameter cast aluminum clamp mount
  • Angebotspaket: Nein
  • Modifizierter Artikel: Nein
  • Modell/Typ: 2.2KW water-cooled spindle&VFD&Clamp&Pump&Collet
  • Maschinengewicht (kg): 10.5kg
  • Leistungsbedarf (kW): 2,2KW
  • Maßeinheit: kg
  • Steuerungsart: CNC
  • Anzahl der Einheiten: 1Set
  • Herstellungsland und -region: China
  • Size: 80x246mm
  • Bearing: 4 bearings (C7005x2 + C7003x2)
  • Cooling: Water cooled
  • Collet: 14pcs ER20 collet (1-13mm) and 1pcs 3.175mm
  • Speed: 10-24000rpm
  • Frequency: 0-400Hz
  • Voltage: 220V
  • Water Pump: 75W Water Pump 220V 3.2m

PicClick Insights - 『DE』2.2KW ER20 80MM CNC Frässpindel Motor Wassergekühlte VFD Clamp Pumpe Collets PicClick Exklusiv

  •  Popularität - 4 Beobachter, 0.0 neue Beobachter pro Tag, 767 days for sale on eBay. Sehr hohe beobachtend. 0 verkauft, 3 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 1.731+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv